Diameter is the first number asked about a vintage watch and the least useful. It measures the case without the crown, and says little about how much wrist a watch covers or how large it looks.
The numbers that decide it
Lug-to-lug comes first: the span from the tips of the top lugs to the tips of the bottom ones. Lay a ruler across the top of a 17 cm wrist and it reads about 5 cm, so lugs that span 45 mm sit inside it with room to spare, and 52 mm starts to hang over the edges.
Then the bezel. A slim bezel leaves more of the case to the dial, so a 34 mm watch with a thin bezel shows as much dial as a 36 mm one with a broad bezel. Then thickness, which decides whether a watch slips under a cuff or catches on it.
Most men’s watches from the fifties and sixties measure between 33 and 37 mm. Long, curved lugs can carry a 34 mm dress watch across as much wrist as a 38 mm case with short ones, and a cushion case wears larger than a round case of the same diameter.
Smaller cases have one cost: smaller hands and smaller print, which take a closer look in dim light.



